Magnetic Surface Preparation

The magnetic sheet and metal surface should be clean and dry.  In any outdoor application, such as car signs, the metal surface should be waxed.

Magnetic Application

Magnetic sheet holds best to flat surfaces and surfaces reasonably curved in one direction. 

When the magnet is placed in the wrong position, remove the magnet and realign.  DO NOT pull the magnet to realign when it is against the surface, as the magnet may stretch due to the resistance caused by the high magnetic strength.  Make sure the entire magnet is against the metal surface (no air pockets).

Cleaning

Some moisture and dirt will collect between the magnet and the metal surface, particularly in outside applications (car signs).

Remove and clean both the magnet and surface with mild detergent and allow both to dry.  For car signs, repeat the cleaning process weekly.

To protect the new clear coat/base coat and vinyl surfaces present on new cars and trucks, we recommend applying magnetic sheet to repainted surfaces.

Storage

The best way to store magnetic pieces is either flat or in rolls.  Magnetics should NEVER be stored magnet to magnet.

When storing in rolls, wrap the coated surface on the outside to avoid the possibility of wrinkles.